Configuration: ABS headboard, six speed aluminum guardrail, central control brake
1: Specifications and dimensions: 2150 × 950 × 430/730mm (excluding headboard height)
2: Lift function:
1. Back lifting: lifting angle 0-75 º, ± 5 º;
2. Leg lifting: lifting angle 0-35 º, ± 5 º;
3. Overall lifting: The overall lifting height is 300mm.
3, Bed panel
1. Bed surface: Made of high-quality cold-rolled steel plates formed by molds, the bed surface is punched as a whole, with no welding seams at all four corners. The steel plate thickness is ≥ 1.0mm, and the surface is coated with electrostatic spraying
Processing, using the molding process of the bed board, one-time molding process, steel plate filled with reinforcing ribs to increase strength, with breathable holes; Weld reinforcing ribs around the bed board to increase
Add load-bearing capacity.
2. The connection between the backrest of the hospital bed and the leg board is made of 2.5-thick pipes, which evenly distribute the weight of the patient on the bed beam.
3. The bed board link adopts steel hinges, stamped and formed by molds, with a single piece thickness of 4mm. Wear resistant, operates without noise, and prevents breakage.
4: Main components of the bed:
1. The bed frame is made of high-quality carbon steel rectangular tubes measuring 40mm x 80mm x 1.2mm;
2. The four corners of the bed are equipped with anti-collision corners, which are made of ABS engineering plastic injection molded in one go. The corners can only be disassembled with special tools and have a beautiful appearance. Bed body
There are infusion rack sockets at the four corners, and the infusion position can be selected as needed.
3. Decorative anti-collision strips are added on both sides of the bed, made of ABS material, which is aesthetically pleasing and provides effective protection for the bed.
5: Guardrail
Guardrail: Six level aluminum alloy folding guardrail, fully covered structure, six level design, guardrail surface treated with electrophoretic hardening, anti pinch design, can be made according to needs
Lift adjustment. It can be covered with high-quality dining table boards as needed, making it convenient for patients to eat and read daily. When the guardrail shrinks, it is slightly lower than the mattress, which conforms to ergonomics.
D-type ABS armrest, can retract freely; The upper and lower supports of the guardrail are made of cold-rolled steel stamping parts with a thickness of ≥ 3.0mm. Each support is wrapped with an ABS jacket and high-strength fiberglass nylon
Quick positioning switch, dust-proof, aesthetically pleasing, sturdy and durable, capable of withstanding a tensile load of 50 kilograms, stable, not easily damaged, anti pinch, and easy to operate.
6: Bedhead and footboard
1. High strength engineering plastic injection molding, with a smooth surface and easy cleaning;
2. Adopting a hanging structure, high strength, strong stability, and easy disassembly;
3. Non hollow design, partial fusion of front and rear plastics, high strength.
7: Caster wheels
1. The bed legs are made of 30 × 50 × 2.0mm steel frame;
The casters are firmly assembled with the bed frame, and there will be no relative sliding of the bed after braking, making it easy to push and control. The caster main frame and wheel core are made of strong load-bearing PA6
The material has the characteristics of oil resistance, wear resistance, drug resistance, and chemical resistance, ensuring the service life of the casters. The wheel surface material adopts wear-resistant TPR, which has oil and water resistance
The characteristics of drug resistance and mold resistance, as well as good shock absorption and noise reduction, are equipped with precision bearings inside the casters to reduce noise and improve the overall performance of the casters
The smoothness.
8: Bed frame processing
1. The overall bed frame is made of high-quality cold-rolled profiles, ensuring that the entire bed body is sturdy, firm, and runs smoothly. Then, automated spraying equipment is used for spraying and coating
Uniform, with characteristics such as antibacterial, acid and alkali resistance, corrosion resistance, and fading resistance. After continuous salt spray testing for more than 90 hours, the bed panel has no cracks or defects
Rusty, smooth and unchanged.
2. Spray coating process: The entire metal surface treatment adopts degreasing and degreasing, cleaning, acid washing and rust removal, cleaning, neutralization treatment, surface treatment, phosphating treatment, cleaning, etc
It is made up of eleven processes including drying, electrostatic powder coating, high-temperature baking and curing through a fully automatic spraying line. The phosphating process uses zinc based materials to prevent rusting of the inner wall of the material,
Strong adhesion, smooth and even surface, corrosion-resistant, powder coating on the surface, ivory white after high-temperature spraying.
9: Traditional system:
1. Hand crank: Made of high-strength ABS engineering plastic material, with built-in metal parts, universal joint structure, hidden and anti-collision foot design, sturdy and durable.
2. Screw and connecting parts: The movable connecting parts of each part are made of high-quality cold-rolled steel plate with a thickness of 3.0mm, and the surface is treated with electrostatic spraying. The screw is equipped with an extended nut to prevent dust
The sleeve structure features a 45 gauge rolling screw that is fully enclosed and maintenance free, with two pole idle limit settings to prevent wear and tear.
3. Manually achieve back lifting, leg lifting, and overall lifting. Overall lifting height: 300MM (the lowest height of the bed from the ground is 430mm, and the highest height from the ground is 730mm),
Back lifting range: 75 º ± 5 °, foot lifting range: 35 º ± 5 °.
10: Infusion stand
1. Telescopic, four hook foldable, made of stainless steel material, adjustable in height with locking device, easy to operate.
11: Mattress
1. The size and segmentation of the mattress match the bed, and the outer layer is made of dark green Oxford cloth. The bottom layer is a 40mm coconut fiber formed pad, and the surface layer is 30mm high elastic sponge with transparency
Pores, fully detachable mattress cover design, easy to disassemble and wash.
12: Static load-bearing capacity of the bed body ≥ 400KG
| Model |
HK-B2 |
| Back lifting: lifting angle |
0-75 º, ± 5 º |
| Leg lifting: lifting angle |
0-35 º, ± 5 º |
| High and low lifting |
430-730mm |
Audited Supplier 
){kind=link}