Hospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing Bed

Product Details
Customization: Available
Material: Metal
Type: Electric Bed
Manufacturer/Factory
Gold Member Since 2023

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
10000000 RMB
Plant Area
>2000 square meters
  • Hospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing Bed
  • Hospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing Bed
  • Hospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing Bed
  • Hospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing Bed
  • Hospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing Bed
  • Hospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing Bed
Find Similar Products

Basic Info.

Model NO.
HK-B18
Using Ambient
Hospital
Numbers of Function
Three-function
Certification
CE, ISO13485
Condition
New
Bearing
400kg
Specification
2300*950*500mm
Trademark
bewa
Origin
China
Production Capacity
50000

Product Description

Configuration: ABS headboard, six speed aluminum alloy guardrail, four corner brake, towing frame
1: Specification size: 2300 * 950 * 500mm (excluding headboard height)
2: Lift function:
1. Back lifting: lifting angle 0-75 º, ± 5 º;
2. Split leg lifting: lifting angle 0-35 º, ± 5 º;
3, Bed panel
1. Bed surface: The bed surface frame is made of 20 * 30 * 1.2 flat tubes bent by molds, and the bed surface is formed by cold plate stretching. The steel plate thickness is ≥
0.8mm, increased load-bearing capacity, surface treated with electrostatic spraying.
2. The connection between the backrest of the hospital bed and the leg board is made of 1.8-walled pipes, which evenly distribute the weight of the patient on the bed beam.
3. The bed board link adopts steel hinges, stamped and formed by molds, with a single piece thickness of 3mm. Wear resistant, operates without noise, and prevents breakage.
4: Main components of the bed:
1. The bed frame is made of high-quality carbon steel rectangular tubes measuring 40mm x 80mm x 1.2mm;
2. The four corners of the bed are equipped with anti-collision corners, which are made of ABS engineering plastic injection molded in one go. The corners can only be wrapped with special tools
Dismantling, aesthetically pleasing appearance. There are infusion rack sockets at the four corners of the bed, and the infusion position can be selected as needed.
5: Guardrail
Guardrail: Six level aluminum alloy folding guardrail, fully covered structure, six level design, guardrail surface treated with electrophoretic hardening, anti pinch design, adjustable for lifting as needed. It can be covered with high-quality dining table boards as needed, making it convenient for patients to eat and read daily. When the guardrail shrinks, it is slightly lower than the mattress, which conforms to ergonomics. D-type ABS armrest, can retract freely; The upper and lower supports of the guardrail are made of cold-rolled steel stamping parts with a thickness of ≥ 3.0mm. Each support is wrapped with an ABS jacket and a high-strength fiberglass nylon quick positioning switch. It is dustproof, beautiful, sturdy and durable, and can withstand a tensile load of 50 kilograms. It is stable, not easy to damage, anti pinch, and easy to operate.
6: Bedhead and footboard
1. High strength engineering plastic injection molding, with a smooth surface and easy cleaning;
2. Adopting a hanging structure, high strength, strong stability, and easy disassembly;
3. Non hollow design, partial fusion of front and rear plastics, high strength.
7: Caster wheels
1. The bed legs are made of a 40 × 40 × 1.2mm steel frame;
2. Four brake casters with a diameter of ≥ 5 inches, independent braking function at each corner, anti-static, good noise reduction effect, and strong braking ability,
The rotation should be flexible and reliable, the casters should be firmly assembled with the bed frame, and there should be no relative sliding of the bed after braking, making it easy to push and control,
The main frame and wheel core of the caster are made of PA6 material with strong load-bearing capacity, which has the characteristics of oil resistance, wear resistance, drug resistance, and chemical resistance, ensuring the stability of the foot
The service life of the wheel is achieved by using wear-resistant TPR material on the wheel surface, which has the characteristics of oil resistance, water resistance, drug resistance, and mold resistance. At the same time, it also
It has good shock absorption and noise reduction effects, and the casters are equipped with precision bearings inside to reduce noise and improve the overall smoothness of the casters.
8: Bed frame processing
1. The overall bed frame is made of high-quality cold-rolled profiles, ensuring that the entire bed body is sturdy, firm, and runs smoothly. Then use automated spraying
The coating equipment is used for spraying, and the coating is uniform, with characteristics such as antibacterial, acid and alkali resistance, corrosion resistance, and fading resistance. Bed panel through continuous
After more than 90 hours of salt spray testing, the panel has no cracks, rust, smoothness, or changes.
2. Spray coating process: The entire metal surface treatment adopts degreasing, oil removal, cleaning, acid pickling, rust removal, cleaning, neutralization treatment, and surface treatment
Eleven processes including processing, phosphating, cleaning, drying, electrostatic powder spraying, high-temperature baking and curing are carried out through a fully automatic spraying line
And the phosphating process material is zinc based, which avoids rusting on the inner wall of the material, has strong adhesion on the coating surface, is flat and smooth, corrosion-resistant, and has a surface
Powder coating, ivory white after high-temperature spraying.
9: Traditional system:
1. Hand crank: Made of high-strength ABS engineering plastic material, with built-in metal parts, universal joint structure, hidden and anti-collision feet
Design, sturdy and durable.
2. Screw rod and connecting parts: The movable connecting parts of each part are made of high-quality cold-rolled steel plate with a thickness of 3.0mm, and the surface is treated with electrostatic spraying
The rod adopts an extended nut, dust cover structure, and a 45 gauge rolling screw that is fully enclosed and maintenance free. It has two pole idle limit settings to prevent damage
Consumption.
3. Manually achieve back lifting, leg lifting, back lifting range: 75 º ± 5 °, leg lifting range: 35 º ± 5 °.
10: Traction frame: Integrated combination type traction frame, composed of high-quality stainless steel and spray coated aluminum alloy cross buckle combination, standard traction hook and
Traction weight.
11: Infusion stand
1. Telescopic, four hook foldable, made of stainless steel material, adjustable in height with locking device, easy to operate.
12: Mattress
1. The size and segmentation of the mattress match the bed, and the outer layer is made of dark green Oxford cloth. The bottom layer is a 40mm coconut fiber formed pad, and the surface layer is 30mm
High elasticity sponge with breathable holes, fully detachable mattress cover design for easy disassembly and washing.
13: Static load-bearing capacity of the bed body ≥ 400KG
Model HK-B18
Back lifting: lifting angle 0-75 º, ± 5 º
Leg lifting: lifting angle 0-35 º, ± 5 º


Hospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing BedHospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing BedHospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing BedHospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing BedHospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing BedHospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing BedHospital Bed Orthopedic Traction Bed Orthopedic Specialized Nursing Bed

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier