Configuration: ABS headboard, ABS four small guardrails, central control brake, nurse operator, one button reset, one button special position, one button check
Positioning check, timed turning, electric CPR, battery
1: Specifications and dimensions: 2230 × 1130 × 500/700mm (excluding headboard height)
2: Lift function:
1. Back lifting: lifting angle 0-75 º, ± 5 º;
2. Leg lifting: lifting angle 0-35 º, ± 5 º;
3. Overall lifting: The overall lifting height is 200mm.
4. Left turn: 25 ± 2 º 5, Right turn: 25 ± 2 º 6, Front tilt: 12 ± 2 º 7, Rear tilt: 12 ± 2 º 3, Bed panel
1. Bed surface: Made of high-quality cold-rolled steel plate formed by molds, punched bed surface, steel plate thickness ≥ 1.0mm, surface treated with electrostatic spraying
Processing, using compression molding bed board technology, compression molding process, steel plate filled with reinforcing ribs to increase strength, with breathable holes; Around the bed board
Internal welding reinforcement bars to increase load-bearing capacity.
2. The connection between the backrest of the hospital bed and the leg board is made of 2.5-thick pipes, which evenly distribute the weight of the patient on the bed beam.
3. The bed board link adopts steel hinges, stamped and formed by molds, with a single piece thickness of 3mm. Wear resistant, operates without noise, and prevents breakage.
4: Main components of the bed:
1. The bed frame is made of high-quality carbon steel rectangular tubes measuring 30mm x 50mm x 2.0mm;
2. There are infusion rack sockets at the four corners of the bed, and the infusion position can be selected as needed.
5: ABS damping guardrail
High strength ABS guardrail, capable of vertical and horizontal positioning, sturdy and reliable, equipped with gas springs to buffer the speed of guardrail lifting and lowering, extending
Long service life of guardrails, with up and down lifting function achieved through handle switches. Four piece embedded guardrail made of ABS plastic steel
Made by quality integrated injection molding, corrosion-resistant, the back and leg guardrails can be raised and controlled separately, improving the safety of patients getting on and off the bed
In terms of convenience, the retractable guardrail design provides zero gap transfer function for patients when transferring beds, and the guardrail is not affected by pressure from the inside out
The method of opening requires external and internal pressure to effectively prevent patients from falling off the bed by privately opening the guardrail while in bed,
Both the front and rear guardrails are equipped with angle displays, which can clearly show the angle of rise of the back and legs and the inclination angle of the bed.
6: Bedhead and footboard
1. Made of polyethylene (HDPE) resin material, with a fire rating of HB75, antibacterial, corrosion-resistant, smooth surface, and easy to clean;
2. Adopting a hanging structure, high strength, strong stability, and easy disassembly;
3. Non hollow design, partial fusion of front and rear plastics, high strength.
7: Caster wheels
1. The bed legs are made of 30 × 50 × 2.0mm steel frame;
2. Four Shikerui central control casters with a diameter of ≥ 5 inches, equipped with a bed tail central control brake function, anti-static, good noise reduction effect, strong braking ability, and flexible and reliable rotation. The casters are firmly assembled with the bed frame, and there will be no relative sliding of the bed after braking, making it easy to push and control. The caster main frame and core are made of PA6 material with strong load-bearing capacity, which has oil resistance, wear resistance, drug resistance, and chemical resistance characteristics, ensuring the service life of the casters. The wheel surface material is made of wear-resistant TPR, which has the characteristics of oil resistance, water resistance, drug resistance, and mold resistance. At the same time, it also has good shock absorption and noise reduction. The casters are equipped with precision bearings inside to reduce noise and improve the overall smoothness of the casters.
8: Bed frame processing
1. The overall bed frame is made of high-quality cold-rolled profiles, ensuring that the entire bed body is sturdy, firm, and runs smoothly. Then use automated spraying
The coating equipment is used for spraying, and the coating is uniform, with characteristics such as antibacterial, acid and alkali resistance, corrosion resistance, and fading resistance. Bed panel through continuous
After more than 90 hours of salt spray testing, the panel has no cracks, rust, smoothness, or changes.
2. Spray coating process: The entire metal surface treatment adopts degreasing, oil removal, cleaning, acid pickling, rust removal, cleaning, neutralization treatment, and surface treatment
Eleven processes including processing, phosphating, cleaning, drying, electrostatic powder spraying, high-temperature baking and curing are carried out through a fully automatic spraying line
And the phosphating process material is zinc based, which avoids rusting on the inner wall of the material, has strong adhesion on the coating surface, is flat and smooth, corrosion-resistant, and adopts
Antibacterial powder coating has a strong antibacterial effect on microorganisms such as Escherichia coli and Staphylococcus aureus, with an antibacterial rate of>99.9% and high
After warm spraying, it turns ivory white.
9: Traditional system:
1. Using Lincoln motors, with 5 motors, a single motor can achieve a thrust of 6000N. The motor power parameters are 24V and MAX5.2AMP,
Electric back lifting, leg lifting, and overall lifting. Overall lifting height: 200MM (the minimum height of the bed from the ground is 500MM,
Up to 700mm above the ground, back lift range: 75 °± 5 °, foot lift range: 35 °± 5 °, right turn over: 25
± 2 º, left turn: 25 ± 2 º, forward tilt: 12 ± 2 º, backward tilt: 12 ± 2 º Control system: Various functions of the medical bed are completed through the operation of the nurse controller, including back lifting (up and down) and leg flexion (up and down)
Bottom), overall lifting (up and down), left turn over, right turn over, front tilt, rear tilt, back leg linkage one key special position, one key
Check position, button for one click reset function.
10, Telescopic infusion stand:
1. A single hook can bear a weight of>2.0kg, with four foldable hooks made of stainless steel material and adjustable height with a locking device, making it easy to operate.
2. There are multiple medical hooks on both sides of the bed, and a single drainage hook can support a weight of>2.0kg
11, Static load-bearing capacity>600kg, dynamic load-bearing capacity>250kg; Back weight-bearing capacity>170kg
12: Mattress
The size and segmentation of the mattress match the bed, and the outer cover is made of medical grade dark green Oxford cloth, with a full sponge inner liner and a medical grade waterproof cloth outer cover,
Thickness>80mm Sponge density 35kg/m
| Model |
DC-03 |
| Back lifting: lifting angle |
0-75 º, ± 5 º |
| Leg lifting: lifting angle |
0-35 º, ± 5 º |
| High and low lifting |
500-700mm |
Audited Supplier 
){kind=link}