Configuration: Composite board headboard, solid wood handrails and guardrails, four corner brakes
1: Specification size: 2175 × 965 × 450mm (excluding headboard height)
2: Lift function:
1. Back lifting: lifting angle 0-75 º, ± 5 º;
2. Leg lifting: lifting angle 0-35 º, ± 5 º;
3, Bed panel
1. Bed surface: The bed surface frame is made of 20 * 30 * 1.2 flat tubes bent by molds, and the bed surface is formed by cold plate stretching. The steel plate thickness is ≥ 0.8mm to increase the bearing capacity. Table
The surface is treated with electrostatic spraying.
2. The connection between the backrest of the hospital bed and the leg board is made of 1.8-walled pipes, which evenly distribute the weight of the patient on the bed beam.
3. The bed board link adopts steel hinges, stamped and formed by molds, with a single piece thickness of 3mm. Wear resistant, operates without noise, and prevents breakage.
4: Main components of the bed:
1. The bed frame is made of high-quality carbon steel rectangular tubes measuring 40mm x 80mm x 1.2mm;
2. There are infusion rack sockets at the four corners of the bed, and the infusion position can be selected as needed.
5: Guardrail
Guardrail: Φ 25 * 1.2 round pipes are formed by an automatic bending machine, with surface electrostatic spraying, covered with wooden handrails, and installed independently in four pieces for easy operation by medical staff,
Protecting patients from the risk of falling
6: Bedhead and footboard
1. High strength engineering composite board forming, with a smooth surface and easy cleaning;
2. Adopting a hanging structure, high strength, strong stability, and easy disassembly;
7: Caster wheels
1. The bed legs are made of 50 × 50 × 1.2mm steel frame;
The wheels and bed frame are securely assembled, and there will be no relative sliding of the bed after braking, making it easy to push and control. The caster main frame and wheel core are made of strong load-bearing PA6 material, which has
It has oil resistance, wear resistance, drug resistance, and chemical resistance characteristics to ensure the service life of the casters. The wheel surface material is made of wear-resistant TPR, which has oil resistance, water resistance, drug resistance, and
The characteristics of mold resistance, as well as good shock absorption and noise reduction, are equipped with precision bearings inside the casters to reduce noise and improve the overall smoothness of the casters.
8: Bed frame processing
1. The overall bed frame is made of high-quality cold-rolled profiles, ensuring that the entire bed body is sturdy, firm, and runs smoothly. Then, automated spraying equipment is used for spraying and coating
Uniform, with characteristics such as antibacterial, acid and alkali resistance, corrosion resistance, and fading resistance. After continuous salt spray testing for more than 90 hours, the bed panel has no cracks or defects
Rusty, smooth and unchanged.
2. Spray coating process: The entire metal surface treatment adopts degreasing and degreasing, cleaning, acid washing and rust removal, cleaning, neutralization treatment, surface treatment, phosphating treatment, cleaning, etc
It is made up of eleven processes including drying, electrostatic powder coating, high-temperature baking and curing through a fully automatic spraying line. The phosphating process uses zinc based materials to prevent rusting of the inner wall of the material,
Strong adhesion, smooth and even surface, corrosion-resistant, powder coating on the surface, ivory white after high-temperature spraying.
9: Traditional system:
1. Hand crank: Made of high carbon steel material, all metal parts, universal joint shaft structure, folding and anti-collision foot design, sturdy and durable.
2. Screw and connecting parts: The movable connecting parts of each part are made of high-quality cold-rolled steel plate with a thickness of 3.0mm, and the surface is treated with electrostatic spraying. The screw is equipped with an extended nut to prevent dust
The sleeve structure features a 45 gauge rolling screw that is fully enclosed and maintenance free, with two pole idle limit settings to prevent wear and tear.
3. Manually achieve back lifting, leg lifting, back lifting range: 75 °± 5 °, foot lifting range: 35 °± 5 °.
10: Infusion stand
1. Telescopic, four hook foldable, made of stainless steel material, adjustable in height with locking device, easy to operate.
11: Mattress
1. The size and segmentation of the mattress match the bed, and the outer layer is made of dark green Oxford cloth. The bottom layer is a 40mm coconut fiber formed pad, and the surface layer is 30mm high elastic sponge with transparency
Pores, fully detachable mattress cover design, easy to disassemble and wash.
12: Static load-bearing capacity of the bed body ≥ 400KG
| Model |
HK-A18 |
| Back lifting: lifting angle |
0-75 º, ± 5 º |
| Leg lifting: lifting angle |
0-35 º, ± 5 º |
Audited Supplier 
){kind=link}